SPECIFICATIONS

Input voltage: DC 2.8-5V

Output voltage: DC 5V+-0.3V

Input current: 0-1.2A

Output current: 0-0.8A

Brand Name: eletechsup

Model Number: CE014_5V*5

Output Type: SINGLE

Size: 20.5mm x 10.16mm x 5.6mm

Output Frequency: DC-DC

Output Current: 0-0.8A

Hign-concerned Chemical: none

Weight: about 1.4g

Output Power: 1 – 50W

Origin: Mainland China

is_customized: Yes

Certification: none

Type: DC/DC Converters

Choice: yes

semi_Choice: yes

Product Name :
5 Pcs DC-DC Step Up Boost Converter Module 3V 3.3V 3.7V To 5V Voltage Regulator For Arduino Raspberry Pi 3 18650 Breadboard

Packing list:

5 PCS 5W 3V 3.3V 3.7V 4.5V TO 5V
Boost Step-UP Voltage Regulator
Module

Description:

Input voltage 2.6~6V, output 5V (deviation +-6%)

Maximum input current : 1.2A

Long-term work Current : 1A

Conversion efficiency : 79-91%

Start Voltage 2.6V, Output Current 51MA

INPUT 2.8V 1A; OUTPUT 5V 291MA

INPUT 3V 1A; OUTPUT 5V 480MA

INPUT 3.3V 1A; OUTPUT 5V 592MA

INPUT 3.7V 1A; OUTPUT 5V 650MA

INPUT 4.5V 1A; OUTPUT 5V 791MA

DC-DC Boost module working frequency 1.0MHZ.

Operating ambient temperature : -40~+85 Degrees Celsius

2.54mm pin pitch,Arduiuo UNO DUE Breadboard FPGA/C
PLD
Development Board
friendly.

Over Temperature Protection

Over Voltage Protection

Excluding Pin Size 20.5mm x 10.16mm x 5.6mm(
Very small
)

Weight : about 1.4g(
Very light
)

Applications:

MCU Development Board,FPGA/CPLD UNO MEGA2560 DUE 8051 AVR C8051 etc

raspberry pi 1/2/3,breadboard

18650 lithium battery

RS485 PLC Modbus RTU

MP3 MP3 mobile phone charger

5V Relay board

5V LED

Wireless communication equipment

315M 433M Wireless remote controller

Attention :

This is a DC-DC voltage converter module,Must be noted when using:

1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself

Q & A:

Q : Why output voltage is less than the nominal voltage

A : Input power supply power is too low.Test the input voltage with a multimeter, a t this time of the input voltage is very low